Fix MIPI Fail Samsung – No Service, Stuck in Airplane Mode, or MIPI DEVICE FAIL [FREE]

Features Image

What is MIPI FAIL Error on Samsung?

MIPI FAIL is a common issue on Samsung smartphones where users see errors like "No Service," "Stuck in Airplane Mode," or "MIPI DEVICE FAIL." This happens when the device's internal components fail to communicate properly with the processor. Firmware updates or hardware issues can often cause this error.

Key Features of the Fix

Restores network connectivity
Fixes "MIPI DEVICE FAIL" error
Works on all Samsung smartphones
Uses tested and verified repair methods
Free solution with easy steps

Supported Devices

This method works on all Samsung smartphones facing the MIPI FAIL error, including:

Samsung Galaxy S series
Samsung Galaxy Note series
Samsung Galaxy A series
Samsung Galaxy M series
Other Samsung models with similar issues

System Requirements for the Fix

To apply this fix, you will need:

A Samsung smartphone with MIPI FAIL issue
A Windows PC
Odin Flash Tool (Latest patched version)
Combination Firmware for your device model
Official Samsung firmware files (BL, AP, CP, CSC)

How to Fix MIPI FAIL on Samsung Smartphones?

Method 1: Flash Combination File

Flash the Combination Firmware on your device using Odin.
After booting up, dial *#27663368378# in the dial pad.
A service menu will appear. Navigate to:
- Setting
- System
- Nv Rebuild
Select All, then restart your phone.
Your network should now be restored.
Flash the official firmware using the 4-file method:
- BL (Bootloader)
- AP (Application Processor)
- CP (Modem)
- CSC (Use files from the Combination Firmware: Cache, Herolte.pit, Meta.Data)
Use Odin to flash these files.
Once the process completes, your network should work again.

Method 2: NV Backup & Restore

Flash the Combination Firmware first.
Dial *#33725327# to access the NV Backup Test Menu.
Backup the EFS partition before making any changes.
Select EFS CLEAR & RESTORE, then reboot your phone.
Check the MIPI Status in the service menu:
- If the error is still there, it is likely a hardware issue.
- If no hardware issue is detected, flash only these firmware files:
  - AP
  - BL
  - CP
If you see a "SYSTEM SIZE TOO BIG" error during flashing:
- Flash only the PIT file from the CSC folder.
- Use the latest patched Odin version.
- Re-enter Download Mode.
- Reflash the firmware files:
  - AP
  - BL
  - CP
If the phone shows "SYSTEM PARTITION IS DAMAGED", select RESET when prompted.
Wait for the phone to restart and check if the issue is fixed.

How to Download the Fix?

Download the required Combination Firmware for your Samsung model.
Get the latest Odin Flash Tool (patched version).
Download the official Samsung firmware for your device.
Follow the flashing steps mentioned above.

Advantages of This Fix

✔ 100% free solution

✔ Works on all Samsung smartphones

✔ No professional tools required

✔ Fixes network and service issues permanently

✔ Simple and easy-to-follow steps

Troubleshooting Common Issues

My phone is still stuck in "No Service" mode.

Check if you flashed the correct firmware.
Ensure you used the latest patched Odin tool.
Try flashing only AP, BL, and CP files again.

My phone is showing "SYSTEM PARTITION IS DAMAGED."

Select RESET when prompted.
Reflash the firmware using the PIT file.

The MIPI FAIL issue is still there after flashing.

If none of the fixes work, it is most likely a hardware issue.
Take your device to a repair center for further inspection.

Conclusion

The MIPI FAIL error on Samsung devices can be frustrating, but with the right steps, it can be fixed. By following the Combination File Method or NV Backup & Restore Method, users can restore their network and fix errors like "No Service" or "Stuck in Airplane Mode." These solutions work on all Samsung smartphones and are completely free to use. If the issue persists after trying these methods, it may be a hardware problem that requires professional repair.

Fix MIPI Fail Samsung – No Service, Stuck in Airplane Mode, or MIPI DEVICE FAIL [FREE]