✅ Fix Realme 5i (RMX2032 - RMX2030) Hang on Logo – No Data Loss [New Working Solution 2025]

📌 Introduction

Fix Realme 5i Hang on Logo without Data Loss using a tested method that requires no flashing or formatting. If your Realme 5i (RMX2032 / RMX2030) is stuck on the boot logo, don’t worry — this latest solution is working and safe. With the help of a special GSM tool (FRT Tool), you can bring your phone back to life easily.

---

📸 Features Image

---

🔑 Key Features of FRT Tool [Realme Boot Logo Fix 2025]

• No need for full flashing or factory reset
• 100% Data Safe Method
• Works with Qualcomm chipset models
• Tested on Realme 5i RMX2032 and RMX2030
• Optional MRT Dongle support
• Automatic device detection in EDL mode
• Partition-level erase option (safe operation)

---

📱 Supported Devices

• Realme 5i RMX2032
• Realme 5i RMX2030
• Other Qualcomm-based Realme phones (bootloop/hang fix)

---

🛠️ How to Use FRT Tool to Fix Hang on Logo

• Install Qualcomm USB Drivers
  Make sure drivers are installed properly on your PC.
• Launch FRT Tool
  Open the Flash Repair Tool. If you have MRT Dongle, plug it in
  (optional).
• Boot Phone into EDL Mode
  Power off device and connect in Emergency Download Mode. No test point needed.
• Tool Will Detect Automatically
  FRT Tool will detect your device once connected.

• Setup in FRT

  Chipset: Select Qualcomm
  Firehose: Set to Automatic
  Port: Leave as Auto
  Go to Flasher Tab
• Select Read Info and click Start
  Erase the ‘misc’ Partition
  Right-click on “misc” partition
  Click “Erase Partition”
  Wait for success message
• Reboot Device
  Disconnect the phone and boot normally — your phone should now start without hanging on the logo.

---

📥 How to Download FRT Tool

The FRT Tool is available for free (for users with MRT Dongle) or can be accessed with proper credentials. You can find the latest version on trusted GSM software Hub websites or tool hubs.

Qualcomm USB drivers                    FRP Tool

---

💡 Advantages of This Method

• No risk of data loss
• Works fast — less than 5 minutes
• Safe operation through official partition method
• Avoids flashing entire firmware
• Helps save time for GSM technicians and users

---

🧾 File Information

• Tool Name: FRT Tool (Flash Repair Tool)
• Compatibility: Windows 7/8/10/11
• Supported Chipset: Qualcomm
• Tool Type: Software-based Android Fix Tool
• Optional Hardware: MRT Dongle (for advanced use)

---

🧩 Conclusion

This Fix for Realme 5i RMX2032 / RMX2030 Hang on Logo is a clean and reliable solution for Qualcomm-based Realme phones. With this tested method, there’s no need to worry about data loss or risky flashing. Whether you’re a mobile technician or a regular user, this FRT Tool solution can help bring your phone back in just a few steps.

Use this fix before trying any hard reset or firmware flash — save your time and your data.